Yamaha DM 2000 Version 2 Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Musikinstrument Yamaha DM 2000 Version 2 herunter. Yamaha DM 2000 Version 2 14 Seiten. Version 2
Auch für Yamaha DM 2000 Version 2: Benutzerhandbuch (44 seiten), Installationshandbuch (28 seiten), Installationshandbuch (22 seiten), Software-Installationshandbuch (13 seiten), Benutzerhandbuch (1 seiten), Ergänzendes Handbuch (4 seiten), Benutzerhandbuch (37 seiten), Setup-Handbuch (35 seiten), Orientierungshandbuch (8 seiten), Redundanz-Handbuch (8 seiten), Benutzerhandbuch (3 seiten), (German) Betriebssystem-Installationshandbuch (13 seiten)

Seite drucken
Yamaha DM 2000 Version 2 Installationshandbuch
17
Select [Authorize], [Get access key from
authentication server], then [Have already
created registration code], then click [Next].
The following window opens.
18
Click [Read from file] to read the text file saved
in Step 13.
If you wrote down the ID and code on a piece of paper,
enter the ID and code from the keyboard.
19
Make sure that the correct PRODUCT ID and
registration code are displayed, then click
[Next].
The window indicates "To get access key, get ready to
connect to the Internet and click [Next]."
20
Make sure that you are prepared to access the
Internet, then click [Next].
The computer connects to the authentication server and
obtains the access key.
21
When the access key is obtained, the following
window opens:
22
Select [Save access key to write into console
later.], then click [Next].
8
The following window opens.
23
Click [Save in file] to save the access key as a
text file.
You can also write down the access key displayed on the
screen.
24
Copy the saved text file to the computer (#1)
that is connected to the console.
Follow the steps below on computer #1.
25
Start the installer, select [Authorize], then [Have
already obtained access key], then click [Next].
The following window opens.
26
Click [Read from file] to read the text file saved
in Step 23.
27
Make sure that the correct access key is
displayed, then click [Next].
The I/O port setting window opens.
28
Make sure that the I/O ports specified in Step 9
are selected, then click [Next].
A window indicating the installation progress opens, and
the Add-On Effects package is installed.
Add-On Effects Installation Guide