Yamaha DM 2000 Version 2 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Musical Instrument Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 14 pages. Version 2
Also for Yamaha DM 2000 Version 2: Owner's Manual (44 pages), Installation Manual (28 pages), Installation Manual (22 pages), Software Installation Manual (13 pages), Owner's Manual (1 pages), Supplementary Manual (4 pages), Owner's Manual (37 pages), Setup Manual (35 pages), Orientation Manual (8 pages), Redundancy Manual (8 pages), Owner's Manual (3 pages), (German) Betriebssystem-Installationshandbuch (13 pages)

Print Page
Yamaha DM 2000 Version 2 Installation Manual
17
Select [Authorize], [Get access key from
authentication server], then [Have already
created registration code], then click [Next].
The following window opens.
18
Click [Read from file] to read the text file saved
in Step 13.
If you wrote down the ID and code on a piece of paper,
enter the ID and code from the keyboard.
19
Make sure that the correct PRODUCT ID and
registration code are displayed, then click
[Next].
The window indicates "To get access key, get ready to
connect to the Internet and click [Next]."
20
Make sure that you are prepared to access the
Internet, then click [Next].
The computer connects to the authentication server and
obtains the access key.
21
When the access key is obtained, the following
window opens:
22
Select [Save access key to write into console
later.], then click [Next].
8
The following window opens.
23
Click [Save in file] to save the access key as a
text file.
You can also write down the access key displayed on the
screen.
24
Copy the saved text file to the computer (#1)
that is connected to the console.
Follow the steps below on computer #1.
25
Start the installer, select [Authorize], then [Have
already obtained access key], then click [Next].
The following window opens.
26
Click [Read from file] to read the text file saved
in Step 23.
27
Make sure that the correct access key is
displayed, then click [Next].
The I/O port setting window opens.
28
Make sure that the I/O ports specified in Step 9
are selected, then click [Next].
A window indicating the installation progress opens, and
the Add-On Effects package is installed.
Add-On Effects Installation Guide