Yamaha DM 2000 Version 2 Installation Manual - Page 10

Browse online or download pdf Installation Manual for Musical Instrument Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 14 pages. Version 2
Also for Yamaha DM 2000 Version 2: Owner's Manual (44 pages), Installation Manual (28 pages), Installation Manual (22 pages), Software Installation Manual (13 pages), Owner's Manual (1 pages), Supplementary Manual (4 pages), Owner's Manual (37 pages), Setup Manual (35 pages), Orientation Manual (8 pages), Redundancy Manual (8 pages), Owner's Manual (3 pages), (German) Betriebssystem-Installationshandbuch (13 pages)

Print Page
Yamaha DM 2000 Version 2 Installation Manual
10
Make sure that "YAMAHA USB IN 0-1" is
selected for the Input port and that "YAMAHA
USB OUT 0-1" is selected for the output port,
then click [Next].
The "Connecting to the console..." message is displayed
and the unregistration code is created.
If you are using Mac OS 9, select "xxxx-1 (xxxx will be
the name of the console you are using)" for the Input
port, and "xxxx-1 (xxxx will be the name of the console
you are using)" for the output port. Note that the port
names vary with the OMS setup files.
11
Select [Connect to the authentication server
and start deauthorizing now], then click [Next].
The "Start de-authorizing" message is displayed.
12
Make sure that you are prepared to access the
Internet, then click [Next].
The computer connects to the authentication server and
de-authorizes the license.
13
When de-authorization is complete, the
following window opens.
The de-authorization is now complete. You can now
install the software on another console.
10

Indirect De-authorization

If you wish to move the license of the Add-On Effects from
one console to another, you must first de-authorize the
license on the current console. If you access the Internet
from another computer (#2), not from the computer (#1)
connected to the console, follow the steps below to de-
authorize the software.
Follow Steps 1 through 10 (on page 9) for direct de-
authorization, then proceed with the following.
11
Select [Save unregistration code to de-authorize
later.], then click [Next].
The following window opens.
12
Click [Save in file] to save the PRODUCT ID and
unregistration code as a text file.
You can also write down the ID and code on a piece of
paper.
13
Copy the text file to the computer (#2) that has
access to the Internet.
Follow the steps below on computer #2.
14
Insert the included CD-ROM into the CD-ROM
drive on computer #2, locate the Upgrade
folder on the CD-ROM ("Mac OS 9: Upgrade"
for Mac OS 9; "Mac OS X: Upgrade" for Mac OS
X), then copy the folder onto the hard disk.
15
Double-click "DMUpgrade.exe" (or
"AE***UpgradeE" for Mac OS) in the Upgrade
folder that you copied to the hard disk.
The installer window opens.
Add-On Effects Installation Guide