Yamaha REVSTAR Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha REVSTAR herunter. Yamaha REVSTAR 15 Seiten.
Auch für Yamaha REVSTAR: Benutzerhandbuch (14 seiten)
- 1. Table of Contents
- 2. Precautions
- 3. Tuning Machine Tension Adjustment
- 4. HEIGHT ADJUSTABLE LOCKING NUT (if Applicable)
- 5. Setting the String Action
- 6. VIBRATO SYSTEM Vintage Type
- 7. VIBRATO SYSTEM Locking Type
- 8. Bridge/Spring Tension Adjustments
- 9. Truss Rod Adjustment
- 10. Pickup Height Adjustment
TRUSS ROD ADJUSTMENT
The curvature of the neck should be slightly concave.
Clockwise rotation of the nut tightens the rod and corrects for too
much concave bow. Counterclockwise rotation of the nut loosens
the rod and corrects for too much convex bend. Make any adjust-
ments gradually. Allow five to ten minutes for setting, and check
the curvature after each 1/2 turn of the truss rod nut.
If too much
If too much
concave bow
convex bend
NOTE: Unless you have experience with truss rods, we suggest
that you entrust this adjustment to your dealer.
The height of the pickup (i.e. distance from the strings) affects
gain — the higher the pickup, the louder the sound, and vice ver-
sa. If the pickup is set too high, sustain and playability will suffer
because of the magnetic pull on the strings. Adjust overall height
using the screws located at either side of the pickup. If the pickup
has individually adjustable polepieces (most humbuckers do),
these can then be adjusted to achieve the best overall balance.
For optimal performance, we recommend measuring a distance of
2-3 millimeters between the bottom of string and the top of adjust-
able pole piece while fretting the highest fret.
Single-coil Pickup
concave
convex
13
PICKUP HEIGHT ADJUSTMENT
Adjustable polepiece
Height adjustment screw
Humbucking Pickup
Height adjustment screw