Yamaha REVSTAR Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha REVSTAR. Yamaha REVSTAR 15 сторінок.
Також для Yamaha REVSTAR: Посібник користувача (14 сторінок)

Друкувати сторінку

TRUSS ROD ADJUSTMENT

The curvature of the neck should be slightly concave.

Clockwise rotation of the nut tightens the rod and corrects for too

much concave bow. Counterclockwise rotation of the nut loosens

the rod and corrects for too much convex bend. Make any adjust-

ments gradually. Allow five to ten minutes for setting, and check

the curvature after each 1/2 turn of the truss rod nut.

If too much

concave bow

convex bend

NOTE: Unless you have experience with truss rods, we suggest

that you entrust this adjustment to your dealer.

The height of the pickup (i.e. distance from the strings) affects

gain — the higher the pickup, the louder the sound, and vice ver-

sa. If the pickup is set too high, sustain and playability will suffer

because of the magnetic pull on the strings. Adjust overall height

using the screws located at either side of the pickup. If the pickup

has individually adjustable polepieces (most humbuckers do),

these can then be adjusted to achieve the best overall balance.

For optimal performance, we recommend measuring a distance of

2-3 millimeters between the bottom of string and the top of adjust-

able pole piece while fretting the highest fret.

Single-coil Pickup

concave

convex

PICKUP HEIGHT ADJUSTMENT

Adjustable polepiece

Height adjustment screw

Humbucking Pickup

Height adjustment screw