Yamaha KX25 Benutzerhandbuch - Seite 35
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektronische Tastatur Yamaha KX25 herunter. Yamaha KX25 49 Seiten. Usb keyboard studio
Seite drucken
Display
VeloFix
1–127
CubaseAI, Cubase4,
DAW Select
LogicPro, DigiPerf,
SONAR
PC+Remot, ProgChg,
ProgChgMode
Remote
MIDI Select
USB, MIDI
MIDI Transmit Ch
01–16
Off, MIDI Out, USB
MIDI In Thru
Out
Device Number
OFF, 1–16, All
OFF, 1.0sec, 1.5sec,
Display Time
2.0sec, 3.0sec,
4.0sec, 5.0sec, Hold
Octave LED
Normal, Reverse
BulkTransmit
—
FactorySet
—
Restoring the Factory-programmed System (Factory Set)
You can restore the factory default settings of the
KX. Follow the instructions below to execute the
Factory Set.
CAUTION
• The edited Arpeggio types and Control Templates
will be lost by executing the Factory Set. Important
data should be saved to the computer by using the
KX Editor (page 6).
1.
From the Top display, press the [UTILITY]
button so that its lamp lights.
Initial
Range
Value
100
Cubase AI
PC+Remot
USB
01
USB Out
10
1.5sec
Normal
—
—
Description
Determines the velocity value when the VelCurve is set to
"Fix.".
Determines the DAW software you use on the computer with
the KX.
Determines the type of the MIDI message generated by
pressing the PROGRAM [INC] and [DEC] buttons.
PC+Remot .... When this is selected, the Program Change
message is transmitted via the USB-MIDI Port1
and the Function message* of Mackie Control is
transmitted via the USB-MIDI Port2.
ProgChg..... When this is selected, the Program Change
message is transmitted via the USB=MIDI Port1.
Remote....... When this is selected, the Function message* of
Mackie Control is transmitted via the USB-MIDI
Port2.
* The "Function message" indicates that the message for the
Functions 9 or 10 of Mackie Control. The [DEC] button on
the KX corresponds to the Function 9 while the [INC]
button corresponds to the Function 10.
Determines the connector for MIDI data transmission/
reception.
Determines the MIDI channel over which the KX transmits
MIDI messages (generated via your keyboard performance).
Determines whether the MIDI messages received via the
MIDI IN connector will be transmitted via the MIDI OUT
connector or USB connector.
Determines the MIDI Device Number of the KX.
Determines the duration (time) for which the value (like the
one called up by operating the CONTROL knob) is shown
temporarily on the display.
Determines the status of OCTAVE LED lamps. When "Normal"
is selected, the LED lamps work as described on page 27.
When "Reverse" is selected, the right and left of the LED
status are reversed.
Transmits all the settings of the KX to the DAW software or
external MIDI device as Bulk data. Press the DATA [INC]
button to start transmission.
Restores the Factory-programmed System of the KX.
2.
Use the SELECT buttons to call up
"FactorySet."
3.
Press the DATA [INC] button.
"Are you sure?" appears on the display.
4.
Press the DATA [INC] button again to
execute the Factory Set.
After the Factory Set has been completed, the
display called up in step 2 appears.
Utility Settings
Owner's Manual
35