Clark CCS185C Handbuch für Betrieb und Wartung - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Säge Clark CCS185C herunter. Clark CCS185C 17 Seiten. 185mm, 1200w circular saw
Seite drucken
MAINTENANCE
WARNING: DISCONNECT THE CIRCULAR SAW FROM THE MAINS SUPPLY
BEFORE FITTING REPLACEMENT BLADES, CLEANING OR ADJUSTMENT.
Keep the machine clean by wiping off dust with a clean cloth.
BLADE REPLACEMENT
1. Place the 2 pin blade wrench in
the 2 holes on the blade clamping
screw. Remove the blade
clamping screw using the 6mm
hex key by turning it anti-
clockwise while holding the 2 pin
wrench in place.
2. Retract the lower blade guard
using the retracting lever and
replace the blade.
• Make sure you pay attention to
the blade direction markings
on the blade.
• Spare blades are available
from your local CLARKE dealer.
3. Replace the blade clamping
screw by hand until it is holding
the blade in position.
4. Place the 2 pin blade wrench in the 2 holes on the blade clamping screw.
5. Tighten the blade clamping screw using the hex key by turning it clockwise
while holding the 2 pin blade wrench in place.
Replacement blades can be purchased from your local CLARKE dealer.
• CLARKE 185mm TCT Circular Saw Blade 24 tooth, Part No. 6490045
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
14