Clark CCS185C Instrukcja obsługi i konserwacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piła Clark CCS185C. Clark CCS185C 17 stron. 185mm, 1200w circular saw

MAINTENANCE

WARNING: DISCONNECT THE CIRCULAR SAW FROM THE MAINS SUPPLY

BEFORE FITTING REPLACEMENT BLADES, CLEANING OR ADJUSTMENT.

Keep the machine clean by wiping off dust with a clean cloth.

1. Place the 2 pin blade wrench in

the 2 holes on the blade clamping

screw. Remove the blade

clamping screw using the 6mm

hex key by turning it anti-

clockwise while holding the 2 pin

wrench in place.

2. Retract the lower blade guard

using the retracting lever and

replace the blade.

• Make sure you pay attention to

the blade direction markings

on the blade.

• Spare blades are available

from your local CLARKE dealer.

3. Replace the blade clamping

screw by hand until it is holding

the blade in position.

4. Place the 2 pin blade wrench in the 2 holes on the blade clamping screw.

5. Tighten the blade clamping screw using the hex key by turning it clockwise

while holding the 2 pin blade wrench in place.

Replacement blades can be purchased from your local CLARKE dealer.

• CLARKE 185mm TCT Circular Saw Blade 24 tooth, Part No. 6490045

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]