Directed 403.TL10 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Directed 403.TL10 herunter. Directed 403.TL10 19 Seiten.

Pre-installation and application warnings

Firmware notes: This section highlights important information for this specific firmware and will assist in

pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.

T-Harness

compatible

It is important to make sure you DO NOT connect the keysense wire in the installation for each of these vehicles or you will

encounter issues when attempting to start the vehicle.

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic

connector.

Refer to "Vehicle connections" following the wiring diagram.

General notes: This section highlights important information for this specific firmware.

Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Also

[1]

please note that by default, the tach is set to 1000 rpm on hybrid vehicles.

Autolight Interrupt connection required ONLY if the vehicule is equipped with automatic headlights.

[2]

Parking lights, trunk release, lock and unlock connections required when not available through Data.

[3]

Depending on the vehicle's trim, the TPMS Ignition Interrupt connection may be required to obtain OEM remote functionality

[4]

during runtime. Note: the TPMS light may flash during runtime.

Some Toyota 2010+ models have different encryption types. Please look at your key blade and identify the markings.

H-stam ped keys

For vehicles with H-stamped keys, see

the TL10 firmware.

403.TL10 2.29 2017 Toyota Camry (H Key)

G-stam ped keys

For vehicles with G-stamped keys, see

the TL5 & TL7 firmware.

Keys required for

programming

operation

Standard Key

For vehicles with dot-stamped keys,

see the TL11 firmware.

Note:

Some replacement keys

may not have any markings on

the key.