Clark Synthesis TACTILE SOUND AQ339 Aquasonic Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für Redner Clark Synthesis TACTILE SOUND AQ339 Aquasonic herunter. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 Seiten. Underwater speaker
Auch für Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Ergänzendes Handbuch (4 seiten), Spezifikationen (1 seiten), Teileliste (1 seiten), Benutzerhandbuch (1 seiten), Referenzblatt (1 seiten), Installationshandbuch (12 seiten), Installationshandbuch (3 seiten), Spezifikation (1 seiten)

ISOLATION TRANSFORMER INSTALLATION

Place the Isolation Transformer

in a dry, indoor, location.

The transformer is not

designed to be mounted

outdoors.

Locate the speaker cable

from the amplifier. Remove

.75 in. (20 mm) of the cable's

outer jacket.

Insert the positive wire

(usually white or red) to the

1+ terminal, and the negative

wire (usually black) to the 1-

connection. Tighten the 1+

and 1- screws.

Diluvio

Underwater Speaker

™

Transformer may be mounted

to a wall using mounting

tabs. (The transformer is

heavy and must be securely

mounted to the wall.)

Remove .3 in. (8 mm) of

insulation from each wire.

Push the gray ring down

until it locks on the

connector's body.

Locate the Neutrik Speakon

connector. Remove the

connector from the bag.

Place the Speakon

connector's blue bushing on

the amplifier cable.

Screw the blue bushing onto

the connector's body. The

connector is now assembled.