Clark Synthesis TACTILE SOUND AQ339 Aquasonic 설치 매뉴얼 - 페이지 14

{카테고리_이름} Clark Synthesis TACTILE SOUND AQ339 Aquasonic에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 페이지. Underwater speaker
Clark Synthesis TACTILE SOUND AQ339 Aquasonic에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지), 사양 (1 페이지), 부품 목록 (1 페이지), 사용자 설명서 (1 페이지), 참조 시트 (1 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (3 페이지), 사양 (1 페이지)

페이지 인쇄

Clark Synthesis TACTILE SOUND AQ339 Aquasonic 설치 매뉴얼

ISOLATION TRANSFORMER INSTALLATION

Place the Isolation Transformer

in a dry, indoor, location.

The transformer is not

designed to be mounted

outdoors.

Locate the speaker cable

from the amplifier. Remove

.75 in. (20 mm) of the cable's

outer jacket.

Insert the positive wire

(usually white or red) to the

1+ terminal, and the negative

wire (usually black) to the 1-

connection. Tighten the 1+

and 1- screws.

Diluvio

Underwater Speaker

™

Transformer may be mounted

to a wall using mounting

tabs. (The transformer is

heavy and must be securely

mounted to the wall.)

Remove .3 in. (8 mm) of

insulation from each wire.

Push the gray ring down

until it locks on the

connector's body.

Locate the Neutrik Speakon

connector. Remove the

connector from the bag.

Place the Speakon

connector's blue bushing on

the amplifier cable.

Screw the blue bushing onto

the connector's body. The

connector is now assembled.