Clark-Reliance Jerguson LumaStar EPL-100 Handbuch für Installation, Betrieb und Wartung - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Arbeitslicht Clark-Reliance Jerguson LumaStar EPL-100 herunter. Clark-Reliance Jerguson LumaStar EPL-100 12 Seiten.
Auch für Clark-Reliance Jerguson LumaStar EPL-100: Handbuch für Installation, Betrieb und Wartung (12 seiten)
Seite drucken
Figure 4
Figure 5
Step 3: While holding the top bracket in place, grab the thumb nut end of the cable, wrap around entire gauge and thread
onto the stud until the bracket is secure. When wrapping the cable around the gauge, make sure to feed the cable above the
bolt as shown above in Figure 5. Snug the cable and secure the thumb nut, but do not fully tighten the thumb nut at this
time.
Figure 6
nd
Step 4: Align bottom bracket, using the 2
bolt if possible. Wrap thumb nut end of the cable around the entire gauge and
begin to thread. Pull the cable loop as tight as possible and fully tighten the thumb nut down as shown in Figure 6. The
lower bracket should now be tight and secure.
16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
www.clark-reliance.com ● [email protected]