Clarke 7640130 Handbuch für Betrieb und Wartung - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke 7640130 herunter. Clarke 7640130 20 Seiten. Pressurised sandblaster

Seite drucken

Clarke 7640130 Handbuch für Betrieb und Wartung

TO STOP BLASTING

While continuing to press and hold

the Trigger, turn the abrasive

control valve to the closed

position, see Fig 13.

2. When you notice only air (no

abrasive) is coming out of the

safety trigger, you can stop the air

flow by releasing the trigger. By

doing this you are ensuring a

clean and cog-free manifold,

hose, and safety trigger.

3. ALWAYS clean the gun thoroughly after use.

RELEASING PRESSURE FROM THE TANK

When finished blasting, close the

abrasive control valve, see Fig 14.

2. Press and hold the trigger to expel

any remaining abrasive material

from the abrasive hose.

When you notice only air (no

abrasive) is coming out of the

safety trigger, Close the Air Supply

Valve, see Fig 15.

4. Ensure the

throttle valve is open,

see Fig 16.

5. Point trigger in a safe direction.

6. Press the trigger until air stops

flowing and pressure gauge reads

"0".

7. Disconnect air supply hose from

supply valve.

Fig 13

Fig 14

Fig 15

Fig 16