Clarke 7640130 Operation & Maintenance Instructions Manual - Page 11
Browse online or download pdf Operation & Maintenance Instructions Manual for Power Tool Clarke 7640130. Clarke 7640130 20 pages. Pressurised sandblaster
Print Page
TO STOP BLASTING
1.
While continuing to press and hold
the Trigger, turn the abrasive
control valve to the closed
position, see Fig 13.
2. When you notice only air (no
abrasive) is coming out of the
safety trigger, you can stop the air
flow by releasing the trigger. By
doing this you are ensuring a
clean and cog-free manifold,
hose, and safety trigger.
3. ALWAYS clean the gun thoroughly after use.
RELEASING PRESSURE FROM THE TANK
1.
When finished blasting, close the
abrasive control valve, see Fig 14.
2. Press and hold the trigger to expel
any remaining abrasive material
from the abrasive hose.
3.
When you notice only air (no
abrasive) is coming out of the
safety trigger, Close the Air Supply
Valve, see Fig 15.
4. Ensure the
throttle valve is open,
see Fig 16.
5. Point trigger in a safe direction.
6. Press the trigger until air stops
flowing and pressure gauge reads
"0".
7. Disconnect air supply hose from
supply valve.
Fig 13
Fig 14
Fig 15
Fig 16
11