Clarke CSA10F Handbuch für Betrieb und Wartung - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke CSA10F herunter. Clarke CSA10F 11 Seiten. 10 ton hydraulic press

Seite drucken

ASSEMBLY

A. CSA10F

Ensure the press and its components

suffered no damage during transit.

Should any damage be apparent,

contact

your

immediately.

Attach the feet and foot struts

to the side supports using the

nuts, bolts and washers

provided, leaving them finger

tight.

Raise the assembly and rock it

to ensure that no part is under

stress and that the structure is

completely stable before

tightening all nuts securely.

Feed the ram assembly down

through the hole in the top

plate and screw it fully into the

threaded hole in the bottom

plate. The pressure gauge at

this point should be facing the

front.

Attach the pump assembly to

the frame by hooking the front

edge into the recess in one

end of the pump platform and

securing at the opposite end

with the screws provided.

Finally, screw on the hose

assembly to the ram inlet.

Your Hydraulic Press is now ready

for use.

HYDRAULIC PUMP/RAM OPERATION

Clarke

dealer

Fig.1