Clarke CSA10F 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CSA10F에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSA10F 11 페이지. 10 ton hydraulic press

ASSEMBLY

A. CSA10F

Ensure the press and its components

suffered no damage during transit.

Should any damage be apparent,

contact

your

immediately.

Attach the feet and foot struts

to the side supports using the

nuts, bolts and washers

provided, leaving them finger

tight.

Raise the assembly and rock it

to ensure that no part is under

stress and that the structure is

completely stable before

tightening all nuts securely.

Feed the ram assembly down

through the hole in the top

plate and screw it fully into the

threaded hole in the bottom

plate. The pressure gauge at

this point should be facing the

front.

Attach the pump assembly to

the frame by hooking the front

edge into the recess in one

end of the pump platform and

securing at the opposite end

with the screws provided.

Finally, screw on the hose

assembly to the ram inlet.

Your Hydraulic Press is now ready

for use.

HYDRAULIC PUMP/RAM OPERATION

Clarke

dealer

Fig.1