Clarke PRO237 Betriebs- und Wartungsanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Elektrowerkzeug Clarke PRO237 herunter. Clarke PRO237 12 Seiten. Digital torque wrench
Seite drucken
3. To set the torque value, press and hold the
When the desired value is reached, press the
next digit. Repeat this for all digits.
SEt
•
is shown on the screen and the last saved value is displayed with
the first digit flashing.
4. Press the
to increase the value of the flashing digit.
5. When the required torque is set, press
the current memory location.
ERRO
Note: "
mum value of 10% capacity or exceeds the 100% maximum
capacity. After 3 seconds, the wrench returns to the target torque
value setting.
Note: After pressing the
mode, if no selection is made with 3 seconds the wrench will
return to the measurement mode.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
button to zero the digit or repeatedly press the
" will be shown if the pre-set torque is less than the mini-
to save the pre-set value at
button to access the torque SELECT
9
button for 2 secs.
button to move to the
button,