Clarke PRO237 운영 및 유지 관리 지침 - 페이지 9

{카테고리_이름} Clarke PRO237에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PRO237 12 페이지. Digital torque wrench

3. To set the torque value, press and hold the

When the desired value is reached, press the

next digit. Repeat this for all digits.

SEt

•

is shown on the screen and the last saved value is displayed with

the first digit flashing.

4. Press the

to increase the value of the flashing digit.

5. When the required torque is set, press

the current memory location.

ERRO

Note: "

mum value of 10% capacity or exceeds the 100% maximum

capacity. After 3 seconds, the wrench returns to the target torque

value setting.

Note: After pressing the

mode, if no selection is made with 3 seconds the wrench will

return to the measurement mode.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

button to zero the digit or repeatedly press the

" will be shown if the pre-set torque is less than the mini-

to save the pre-set value at

button to access the torque SELECT

button for 2 secs.

button to move to the

button,