ALE Coral 144 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker ALE Coral 144 herunter. ALE Coral 144 18 Seiten.

ALE

Fitting a bottle of ink into the reservoir:

●

Using a craft knife (or a sharp blade), cut the round raised plastic dome on the top of

the ink bottle cap (Fig. 14). Turn the bottle up-side down and push into the reservoir

(Fig. 15).

Fig. 14: Cutting the plastic cap of the ink bottle

Switch the controller on. From this moment, the LCD screen will run through the

●

start up procedure. The controller is ready when the red LED goes off. The default

language is English on all new machines. To change the language, please report to

the controller's user manual.

The controller needs to be adjusted to the print-head. To do this, the Setup Wizard

●

is used. It can be accessed from the controller's main screen (Fig. 16). Follow the

steps of the Setup Wizard for basic configuration. Please report to the controller's

user manual for more information.

Then the ink system needs to be purged of air.

Coral144 Operator Manual

Design • Print • Trace

Fig. 16: MasterPad main screen : access to setup

Fig. 15: fitting a bottle

wizard

03/12/2010