Directed Directechs DB3 Installationshandbuch - Seite 17

Seite drucken

Directed Directechs DB3 Installationshandbuch

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

Factory remote.

2. Aftermarket remote.

3. Directed SmartStart

application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover

Close the vehicle doors, hood and trunk, then send the

Remote Start command to start the vehicle.*

Send the Unlock command on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle.

Note: In a PTS vehicle, make sure the factory remote is

inside with you.

Insert your key in the ignition barrel and turn it to the ON

position.

Press the PTS button twice.

Depress the brake pedal, put the car in gear and drive

off.

* Icon and remote appearance may differ depending on the model purchased.

403.CHRYSLER 7.36 2013 Chrysler 200

Press Remote

Start button*

Press Unlock on

either remote*

Enter

vehicle

Key OUT

Key IN

START

Ready to

drive off

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

Exit the vehicle with the factory remote in hand (it is safe

to leave the engine running).

Notes: We recommend that you always lock the doors of

your vehicle when leaving it unattended.

14:36

* Icon and remote appearance may differ depending on the model purchased.

Remote Start Ready (RSR)

14:36

Remote Start Ready (RSR) is a function that enables the interface module

to remote start the vehicle completely on its own. Consequently, there is

no need for an aftermarket or an OEM remote starter in order to start the

vehicle from a distance.

3x OEM Lock Remote Start Activation

This solution includes the option to remote start your vehicle by pressing the Lock button

Key IN

3 times consecutively. If your vehicle allows the OEM remote to remain active while the

START

engine is running, you may shut down your remote starter by pressing the Lock button 3

times once more.

Note: The range offered by OEM remotes is limited and typically requires you to be within

eyesight of the vehicle to control it.

List of available commands

Note that the information below is for many Viper

Autostart

and AstroStart

models. Icons and commands may differ depending on the

model and options purchased. Refer to your authorized installation center for more specific

information.

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

Exit vehicle

with remote

, Clifford

, Python

, Avital

, Automate

14:36