Directed Directechs DB3 설치 매뉴얼 - 페이지 17

{카테고리_이름} Directed Directechs DB3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Directechs DB3 18 페이지. Smart key for 2013 toyota highlander
Directed Directechs DB3에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 매뉴얼 (6 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지)

페이지 인쇄
Directed Directechs DB3 설치 매뉴얼

Quick Reference Guide (customer copy)

Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there
are 3 possible ways you can send commands to your vehicle, using the:
1.
Factory remote.
2. Aftermarket remote.
3. Directed SmartStart
application via your smartphone.
®
If applicable, you can also start the engine remotely by pressing the Lock button 3 times
quickly on your factory remote.
Vehicle takeover
Close the vehicle doors, hood and trunk, then send the
1
Remote Start command to start the vehicle.*
Send the Unlock command on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle.
3
Note: In a PTS vehicle, make sure the factory remote is
inside with you.
Insert your key in the ignition barrel and turn it to the ON
position.
4
OR
Press the PTS button twice.
Depress the brake pedal, put the car in gear and drive
5
off.
* Icon and remote appearance may differ depending on the model purchased.
17
403.CHRYSLER 7.36 2013 Chrysler 200
©2023 Directed. All rights
Press Remote
Start button*
Press Unlock on
either remote*
Enter
vehicle
Key OUT
Key IN
Key IN
START
START
OR
Ready to
drive off
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the gear
1
in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the vehicle is
now in Pit Stop Mode.
Exit the vehicle with the factory remote in hand (it is safe
to leave the engine running).
3
Notes: We recommend that you always lock the doors of
your vehicle when leaving it unattended.
14:36
* Icon and remote appearance may differ depending on the model purchased.
Remote Start Ready (RSR)
14:36
Remote Start Ready (RSR) is a function that enables the interface module
to remote start the vehicle completely on its own. Consequently, there is
no need for an aftermarket or an OEM remote starter in order to start the
vehicle from a distance.
3x OEM Lock Remote Start Activation
This solution includes the option to remote start your vehicle by pressing the Lock button
Key IN
3 times consecutively. If your vehicle allows the OEM remote to remain active while the
START
START
engine is running, you may shut down your remote starter by pressing the Lock button 3
times once more.
Note: The range offered by OEM remotes is limited and typically requires you to be within
eyesight of the vehicle to control it.
List of available commands
Note that the information below is for many Viper
Autostart
and AstroStart
models. Icons and commands may differ depending on the
®
®
model and options purchased. Refer to your authorized installation center for more specific
information.
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
Exit vehicle
with remote
, Clifford
, Python
, Avital
, Automate
®
®
®
®
14:36
,
®