ALE TC Series Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker ALE TC Series herunter. ALE TC Series 18 Seiten.

To prime the system, proceed as follows :

Press the "prime" key

●

This menu offers 3 options:

Jet : primes the circuit at high pressure

–

Test : prints with all nozzles

–

Norm : primes the circuit at low pressure

–

To ink up the circuit "from dry" the "Jet" prime is used first. On the display the

●

second line shows:

display now shows

Press

. You should hear the pump "load" (the whirring noise slows down when the

●

pumps fills in with ink) Repeat this operation until

Prime twice more using the "Jet" function to remove air from the ink circuit.

●

Prime at least once using the "Norm" function. This is done to remove the remaining

●

air bubbles from the circuit.

Carefully wipe excess ink off (Fig. 17).

●

with a special "non wetting coating" which is self cleaning.

TC series print-heads Operator Manual

Design • Print • Trace

. It leads to the prime menu (Fig. 16).

Fig. 16: J-Series prime menu

WARNING :

The pump pressure in "inking up" mode is maximum and

ink will jet out!!!

Fig. 17: !! Carefully and gently !! wipe the excess ink

.Press the arrow left

ink jets out of the

Do not touch the nozzle plate

07/07/2011

to get a "Jet" prime. The

print-engine.

: it is coated