ALE TC Series Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker ALE TC Series herunter. ALE TC Series 18 Seiten.
Seite drucken2.2
Inking up for the first time "from dry"
It is recommended that the printer is removed from the production line
during this procedure as there is a risk of ink spillage. Fix the printer to a
suitable support.
Support the TC print-head to a floor-stand, in printing position.
●
With the controller switched off, connect it to the print-head using the data cable
●
from the TC series print-head.
Note : the TC print-head can be connected either to a J-Series controller (D25 cable format)
or a Master Pad controller (IEEE1394 cable format). The following procedure describes how
to operate the TC print-head with a J-Series controller. For instructions on how to operate a
TC print-head with a Master Pad controller, please ask your distributor for a Master Pad
user manual.
Remove the air pin from the ink tray (Fig. 12). This pin prevents leaks from the
●
reservoir
during
Fig. 12: Remove air pin and
cap
Place a collecting bucket in front of the print-head (Fig. 13).
●
For the TC72 OIL version, fit an
●
For the TC54 OIL version or TC18 OIL version, fit an
●
reservoir.
SAFETY WARNING! The inks and solvent cleaners are chemical
products. In the interests of safety, read the Material Safety Data
Sheets carefully before handling the fluids. Always wear protective
gloves and eye protection when in contact with any inks or solvents.
TC series print-heads Operator Manual
Design • Print • Trace
shipment.
Also
Fig. 13: Place a collecting bucket in front of the print-head
BOBET7X 250mL ink bottle in the reservoir
ALE
remove
the
cap
BOB 250mL ink bottle in the
ALE
07/07/2011
from
the
reservoir.
7