ALE TC Series Manuel de l'opérateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} ALE TC Series. ALE TC Series 18 pages.

Imprimer la page

2.2

Inking up for the first time "from dry"

It is recommended that the printer is removed from the production line

during this procedure as there is a risk of ink spillage. Fix the printer to a

suitable support.

Support the TC print-head to a floor-stand, in printing position.

●

With the controller switched off, connect it to the print-head using the data cable

●

from the TC series print-head.

Note : the TC print-head can be connected either to a J-Series controller (D25 cable format)

or a Master Pad controller (IEEE1394 cable format). The following procedure describes how

to operate the TC print-head with a J-Series controller. For instructions on how to operate a

TC print-head with a Master Pad controller, please ask your distributor for a Master Pad

user manual.

Remove the air pin from the ink tray (Fig. 12). This pin prevents leaks from the

●

reservoir

during

Fig. 12: Remove air pin and

cap

Place a collecting bucket in front of the print-head (Fig. 13).

●

For the TC72 OIL version, fit an

●

For the TC54 OIL version or TC18 OIL version, fit an

●

reservoir.

SAFETY WARNING! The inks and solvent cleaners are chemical

products. In the interests of safety, read the Material Safety Data

Sheets carefully before handling the fluids. Always wear protective

gloves and eye protection when in contact with any inks or solvents.

TC series print-heads Operator Manual

Design • Print • Trace

shipment.

Also

Fig. 13: Place a collecting bucket in front of the print-head

BOBET7X 250mL ink bottle in the reservoir

ALE

remove

the

cap

BOB 250mL ink bottle in the

ALE

07/07/2011

from

the

reservoir.