Zanussi ZOG21317XK Benutzerhandbuch - Seite 20

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen Zanussi ZOG21317XK herunter. Zanussi ZOG21317XK 28 Seiten.

Seite drucken

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem

The oven does not heat up.

The oven does not operate.

The lamp does not operate.

Steam and condensation settle

on the food and in the cavity of

the oven.

The flame extinguishes immedi-

ately after ignition.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Possible cause

The oven is deactivated.

The fuse is blown.

The automatic ignition does not

work.

The lamp is defective.

You left the dish in the oven for

too long.

Thermocouple is not heated up

sufficiently.

We recommend that you write the data here:

Activate the oven.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Ignite the burner manually with a

long match. Hold the flame near

the hole in the bottom of the oven

cavity. At the same time push the

knob for the gas control and turn

it counterclockwise to the maxi-

mum temperature. When the

flame comes on, keep the knob

for the gas control pushed for 15

seconds or less to let the ther-

mocouple warm up. If not, the

gas flow is interrupted.

Replace the lamp.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

After lightning the flame, keep the

knob for the gas control pushed

for 15 seconds or less.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

.........................................

Remedy