Zanussi ZOG21317XK Manual del usuario - Página 20
Navegue en línea o descargue pdf Manual del usuario para Horno Zanussi ZOG21317XK. Zanussi ZOG21317XK 28 páginas.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not operate.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The flame extinguishes immedi-
ately after ignition.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
20
Possible cause
The oven is deactivated.
The fuse is blown.
The automatic ignition does not
work.
The lamp is defective.
You left the dish in the oven for
too long.
Thermocouple is not heated up
sufficiently.
We recommend that you write the data here:
Activate the oven.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Ignite the burner manually with a
long match. Hold the flame near
the hole in the bottom of the oven
cavity. At the same time push the
knob for the gas control and turn
it counterclockwise to the maxi-
mum temperature. When the
flame comes on, keep the knob
for the gas control pushed for 15
seconds or less to let the ther-
mocouple warm up. If not, the
gas flow is interrupted.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
After lightning the flame, keep the
knob for the gas control pushed
for 15 seconds or less.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
www.zanussi.com