Zanussi FE 4000 Anweisungen für Gebrauch und Pflege - Seite 14
Blättern Sie online oder laden Sie pdf Anweisungen für Gebrauch und Pflege für Waschmaschine Zanussi FE 4000 herunter. Zanussi FE 4000 36 Seiten. Front-load washing machine
Auch für Zanussi FE 4000: Handbuch für Gebrauch und Pflege (36 seiten)
Seite druckenF Prewash pushbutton LU
This button should be depressed to wash
heavily soiled clothes. In this case, the
main wash will be preceded by a prewash
(see charts pages 16-19).
The Prewash symbol UJ appears on the
display window. When this button is
pressed again, the prewash is cancelled.
G Half load pushbutton W
By depressing this button the number of
rinses is reduced. This is useful if you want
to wash half loads (up to 2 kg of cotton or
linen items, or up to 1 kg of some synthetic
fabrics).
The half load facility is not available on all
programmes, and if the symbol does not
appear in the window, the programme is
not suitable for a half load.
To clear the half load function, press the
button again.
Do not use this pushbutton for washing
towelling or other highly absorbent
fabrics: the machine jams and an alarm
code will appear on the display (E) (see
servicing on pages 31-32).
H Spin pushbutton 650
By pressing this button in at the
beginning of an energetic wash cycle, the
spin speed is reduced from 1100 r.p.m. to
650 r.p.m.. The Spin Speed symbol 650
appears in the display window.
Pressing the button again returns the spin
speed to 1100 r.p.m.
I Start pushbutton
D
By pressing this button the programme
will begin.
Once the button has been pressed, the
length of time which it will take for the
programme to be completed is shown in
the display window; the key symbol m0
stops flashing to indicate that the door is
now locked. If the key symbol continues
to flash it indicates that the door has not
been properly closed.
To cancel the programme during a wash
cycle, press the Start Button for
approximately 5 seconds. This cancels
the cycle in progress and a zero
[/ is
shown in the display window.
At the end of a gentle wash cycle, which
finishes with the fabric being suspended
in water, if the Start Button is pressed
the machine automatically drains and
spins briefly.
After 1-2 minutes at the end of the wash
cycle, the key symbol mO flashes to
indicate that the door can be opened.
Once the Start Button has been pressed
and the programme is in operation, the
Prewash, Half Load and Spin Speed
Buttons become inoperative.
Should there be a power failure, the
selected programme remains in the
washing machine's memory for between
5-10 minutes. If the power is restored
within this time then the wash cycle will
continue automatically.