Zanussi FE 4000 사용 및 관리 지침 - 페이지 14

{카테고리_이름} Zanussi FE 4000에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FE 4000 36 페이지. Front-load washing machine
Zanussi FE 4000에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (36 페이지)

페이지 인쇄

F Prewash pushbutton LU

This button should be depressed to wash

heavily soiled clothes. In this case, the

main wash will be preceded by a prewash

(see charts pages 16-19).

The Prewash symbol UJ appears on the

display window. When this button is

pressed again, the prewash is cancelled.

G Half load pushbutton W

By depressing this button the number of

rinses is reduced. This is useful if you want

to wash half loads (up to 2 kg of cotton or

linen items, or up to 1 kg of some synthetic

fabrics).

The half load facility is not available on all

programmes, and if the symbol does not

appear in the window, the programme is

not suitable for a half load.

To clear the half load function, press the

button again.

Do not use this pushbutton for washing

towelling or other highly absorbent

fabrics: the machine jams and an alarm

code will appear on the display (E) (see

servicing on pages 31-32).

H Spin pushbutton 650

By pressing this button in at the

beginning of an energetic wash cycle, the

spin speed is reduced from 1100 r.p.m. to

650 r.p.m.. The Spin Speed symbol 650

appears in the display window.

Pressing the button again returns the spin

speed to 1100 r.p.m.

I Start pushbutton

By pressing this button the programme

will begin.

Once the button has been pressed, the

length of time which it will take for the

programme to be completed is shown in

the display window; the key symbol m0

stops flashing to indicate that the door is

now locked. If the key symbol continues

to flash it indicates that the door has not

been properly closed.

To cancel the programme during a wash

cycle, press the Start Button for

approximately 5 seconds. This cancels

the cycle in progress and a zero

[/ is

shown in the display window.

At the end of a gentle wash cycle, which

finishes with the fabric being suspended

in water, if the Start Button is pressed

the machine automatically drains and

spins briefly.

After 1-2 minutes at the end of the wash

cycle, the key symbol mO flashes to

indicate that the door can be opened.

Once the Start Button has been pressed

and the programme is in operation, the

Prewash, Half Load and Spin Speed

Buttons become inoperative.

Should there be a power failure, the

selected programme remains in the

washing machine's memory for between

5-10 minutes. If the power is restored

within this time then the wash cycle will

continue automatically.