Zanussi ZKF 661 LX Installations- und Betriebsanleitung - Seite 11
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Kochfeld Zanussi ZKF 661 LX herunter. Zanussi ZKF 661 LX 26 Seiten. Ceramic glass hob
Auch für Zanussi ZKF 661 LX: Installations- und Betriebsanleitung (44 seiten)
Seite drucken
Switching on the Dual-ring Cooking Zone
The switch for the dual-ring cooking zone is switched on by turning
1
clockwise and must not be turned past the stop!
1. Turn the switch for the dual-ring cooking zone
clockwise. Turn past position 10 to the „dual-ring"
symbol until it stops.
2. Then turn back to the required heat setting for
cooking.
3. To stop cooking, turn back to the off position.
The next time the dual-ring cooking zone is re-
3
quired, repeat the above procedure.
Residual heat indicator
The ceramic glass hob is equipped with a residual heat indicator, a
control lamp is allocated to each cooking zone. This lights up as soon
the corresponding cooking zone is hot and warns against inadvertant
contact.
The residual heat indicator only goes out when the cooking zone has
cooled down even when the cooking zone is switched Off.
You can use the residual heat for melting and keeping food warm.
2
Important! As long as the residual heat indicator is illuminated, there
1
is a risk of burns.
Important! If the power supply is interrupted the residual heat indica-
1
tor also goes out and information about residual heat will no longer be
available. However, it is still possible to burn yourself. This can be
avoided by being particularly attentive.
77