Zanussi ZKF 661 LX 설치 및 운영 지침 매뉴얼 - 페이지 11

{카테고리_이름} Zanussi ZKF 661 LX에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKF 661 LX 26 페이지. Ceramic glass hob
Zanussi ZKF 661 LX에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (44 페이지)

페이지 인쇄
Zanussi ZKF 661 LX 설치 및 운영 지침 매뉴얼

Switching on the Dual-ring Cooking Zone

The switch for the dual-ring cooking zone is switched on by turning
1
clockwise and must not be turned past the stop!
1. Turn the switch for the dual-ring cooking zone
clockwise. Turn past position 10 to the „dual-ring"
symbol until it stops.
2. Then turn back to the required heat setting for
cooking.
3. To stop cooking, turn back to the off position.
The next time the dual-ring cooking zone is re-
3
quired, repeat the above procedure.

Residual heat indicator

The ceramic glass hob is equipped with a residual heat indicator, a
control lamp is allocated to each cooking zone. This lights up as soon
the corresponding cooking zone is hot and warns against inadvertant
contact.
The residual heat indicator only goes out when the cooking zone has
cooled down even when the cooking zone is switched Off.
You can use the residual heat for melting and keeping food warm.
2
Important! As long as the residual heat indicator is illuminated, there
1
is a risk of burns.
Important! If the power supply is interrupted the residual heat indica-
1
tor also goes out and information about residual heat will no longer be
available. However, it is still possible to burn yourself. This can be
avoided by being particularly attentive.
77