Zanussi ZKT 630 D Gebrauchsanweisung - Seite 13
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Zanussi ZKT 630 D herunter. Zanussi ZKT 630 D 22 Seiten. Glass ceramic induction hob
Seite drucken
Use the Timer as a Short Time Mea-
surer ("Minute Minder")
The Timer function can also be used as a
3
short time measurer without the automatic
switch-off function, provided that the timer
is not already being used for 1 or more coo-
king zones. No cooking zone may be selec-
ted in this case. The sensor field cooking
zone with the decimal point in the display
must therefore be touched again so that the
decimal point goes out.
Set the time as described above.
Ending the Timer Function Prematu-
rely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer
simultaneously
1. Select the desired cooking zone using the coo-
king zone buttons.
2. Touch the + and - buttons simultaneously:
cooking zone and timer switch off.
Switching off the timer - leaving the coo-
king zone active
1. Select the desired cooking zone using the coo-
king zone buttons.
2. Touch the "Timer" button again.
3. Touch the + and - buttons simultaneously:
– only the timer switches off.
– The cooking zone is left on.
Locking/Unlocking the Control
Panel
The control panel (with the exception of the "On/Off"
sensor field) can be locked at any required time
during cooking in order to prevent adjustment of the
settings e.g. caused by wiping over with a cloth. This
function is also useful as a child safety measure.
1. Touch the button o until the indicator lamp lights
up.
2. To cancel the lock again, touch the lock button
again until the indicator lamp goes out.
Child safety feature! If the cooking field is comple-
tely switched off by the "On/Off" sensor field when
the locking button is activated, the locking button is
active when the cooking field is switched back on,
i.e. it is first necessary to touch the locking button so
that the hobs can be switched back on again.
13