Zanussi ZKT 630 D Instructieboek - Pagina 13

Blader online of download pdf Instructieboek voor {categorie_naam} Zanussi ZKT 630 D. Zanussi ZKT 630 D 22 pagina's. Glass ceramic induction hob

Use the Timer as a Short Time Mea-

surer ("Minute Minder")

The Timer function can also be used as a

short time measurer without the automatic

switch-off function, provided that the timer

is not already being used for 1 or more coo-

king zones. No cooking zone may be selec-

ted in this case. The sensor field cooking

zone with the decimal point in the display

must therefore be touched again so that the

decimal point goes out.

Set the time as described above.

Ending the Timer Function Prematu-

rely

There are two ways of switching off the timer early:

Switching off the cooking zone and timer

simultaneously

1. Select the desired cooking zone using the coo-

king zone buttons.

2. Touch the + and - buttons simultaneously:

cooking zone and timer switch off.

Switching off the timer - leaving the coo-

king zone active

1. Select the desired cooking zone using the coo-

king zone buttons.

2. Touch the "Timer" button again.

3. Touch the + and - buttons simultaneously:

– only the timer switches off.

– The cooking zone is left on.

Locking/Unlocking the Control

Panel

The control panel (with the exception of the "On/Off"

sensor field) can be locked at any required time

during cooking in order to prevent adjustment of the

settings e.g. caused by wiping over with a cloth. This

function is also useful as a child safety measure.

1. Touch the button o until the indicator lamp lights

up.

2. To cancel the lock again, touch the lock button

again until the indicator lamp goes out.

Child safety feature! If the cooking field is comple-

tely switched off by the "On/Off" sensor field when

the locking button is activated, the locking button is

active when the cooking field is switched back on,

i.e. it is first necessary to touch the locking button so

that the hobs can be switched back on again.