Zanussi ZKT 650 D Installations- und Betriebsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Kochfeld Zanussi ZKT 650 D herunter. Zanussi ZKT 650 D 32 Seiten. Glass ceramic induction hob
Auch für Zanussi ZKT 650 D: Gebrauchsanweisung (19 seiten)
Seite drucken
Cooking without the Auto-
matic Heating-Up Function
1. For heating up/browning, select a high power.
2. As soon as steam forms or the fat is hot, switch
back to the required heat setting for the remainder
of the cooking time.
3. Reset to zero in order to end cooking.
2
Note:
When cooking with the induction cooking
zone you should take into account that
– the heating-up times are reduced by the direct en-
ergy transfer to the pan!
– the cooking process stops immediately after the
cooking zone is switched off (no boiling over!)
Locking/Unlocking the
Control Panel
With the exception of the "On/Off" sensor field the
control panel can be locked at any required time dur-
ing cooking in order to prevent adjusting the settings
such as when wiping over with a cloth. This
function is also suitable as a child safety feature.
1. Touch the "Lock" sensor field until the control indi-
cator comes on.
2. To release the lock touch the "Lock" sensor field
again continuously until the control indicator goes
out.
3
Child safety feature! If the hob is completely
switched off using the "On/Off" sensor field
while the lock is on, then the lock will still be
active when the hob is switched on again. To
reactivate the cooking zones, the locking func-
tion must be cancelled as described above.
15