Zanussi ZKT 650 D 설치 및 운영 지침 매뉴얼 - 페이지 15

{카테고리_이름} Zanussi ZKT 650 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 650 D 32 페이지. Glass ceramic induction hob
Zanussi ZKT 650 D에 대해서도 마찬가지입니다: 지침서 (19 페이지)

페이지 인쇄

Cooking without the Auto-

matic Heating-Up Function

1. For heating up/browning, select a high power.

2. As soon as steam forms or the fat is hot, switch

back to the required heat setting for the remainder

of the cooking time.

3. Reset to zero in order to end cooking.

Note:

When cooking with the induction cooking

zone you should take into account that

– the heating-up times are reduced by the direct en-

ergy transfer to the pan!

– the cooking process stops immediately after the

cooking zone is switched off (no boiling over!)

Locking/Unlocking the

Control Panel

With the exception of the "On/Off" sensor field the

control panel can be locked at any required time dur-

ing cooking in order to prevent adjusting the settings

such as when wiping over with a cloth. This

function is also suitable as a child safety feature.

1. Touch the "Lock" sensor field until the control indi-

cator comes on.

2. To release the lock touch the "Lock" sensor field

again continuously until the control indicator goes

out.

Child safety feature! If the hob is completely

switched off using the "On/Off" sensor field

while the lock is on, then the lock will still be

active when the hob is switched on again. To

reactivate the cooking zones, the locking func-

tion must be cancelled as described above.