Zanussi ZKT 650 D 설치 및 운영 지침 매뉴얼 - 페이지 17

{카테고리_이름} Zanussi ZKT 650 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 650 D 32 페이지. Glass ceramic induction hob
Zanussi ZKT 650 D에 대해서도 마찬가지입니다: 지침서 (19 페이지)

Zanussi ZKT 650 D 설치 및 운영 지침 매뉴얼
Displaying the remaining cooking
time
If you select a cooking zone which is in timer mode,
the cooking time still remaining appears in the timer
display window.
Using the timer to measure short
periods of time ("Minute Minder").
1
Important! None of the cooking zones should
be set with the Timer!
1. Touch the "On/Off" sensor field for around two
seconds.
The digital display _ flashes.
2. Touch the TIMER
mer function.
3. Using the
or
sensor fields, set the desired
length of time (for example, 20 minutes).
The Timer begins to run after a few seconds, and in-
dicates the time remaining.
When the set time has elapsed, an audible signal is
sounded.
4. Touch the TIMER
signal.
Ending the timer function prema-
turely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer
simultaneously
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the
and
cooking zone and timer will switch off.
Switching off the timer - leaving the
cooking zone active
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the "Timer" button again.
3. Touch the
and
buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.
sensor field to activate the Ti-
sensor field, to switch off the
buttons simultaneously: The
17