Zanussi ZKT 650 D 설치 및 운영 지침 매뉴얼 - 페이지 14

{카테고리_이름} Zanussi ZKT 650 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 650 D 32 페이지. Glass ceramic induction hob
Zanussi ZKT 650 D에 대해서도 마찬가지입니다: 지침서 (19 페이지)

페이지 인쇄

Cooking with the Automatic

Heating-Up Function

All four cooking zones of the cooking field can be

controlled in nine stages and have an automatic

heating-up function:

– 1, Lowest heat setting

– 9, Highest heat setting

– a, Heating-up function.

With the automatic heating-up function (a), the

cooking zone operates for a certain time at full ca-

pacity and then automatically switches back to the

heat setting selected for further cooking.

The duration of the automatic heating-up function

depends on the heat setting selected for further

cooking.

1. Select the required cooking zone with the cooking

zone sensor fields. The decimal point in the associ-

ated display field illuminates.

2. With the

sensor fields select heat setting

9. Stop briefly and touch the

a lights up in the heat setting display.

3. Next, touch the sensor field

continued heat setting 1 to 8. The heat setting se-

lected for further cooking then is displayed.

After 5 seconds, a appears in the display again in-

stead of heat setting selected for further cooking.

The heat setting is displayed again after the heating-

up time has ended.

If you select a higher heat setting when the au-

tomatic function is in operation, e.g. from 3 to

5, the previous heating-up time is taken into

account. If you select a lower setting, then the

automatic function is brought to an immediate

end. If you start cooking again on a cooking

zone that is still warm, the automatic heating-

up function uses the residual heat. This saves

time and energy.

sensor field again.

and set the required