Zanussi ZKT 863 LX Installations- und Betriebsanleitung - Seite 12
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Kochfeld Zanussi ZKT 863 LX herunter. Zanussi ZKT 863 LX 32 Seiten. Ceramic hob
Auch für Zanussi ZKT 863 LX: Installations- und Betriebsanleitung (36 seiten)
Seite drucken
Cooking using the auto-
matic warm up function
All of the cooking surface's four cooking zones can
be adjusted to any of nine settings, and are
equipped with an automatic warm up function:
– ¿, lowest heat setting
– Ç, highest heat setting
– a, automatic warm up function.
When you select the desired heat setting using the
heat setting selector sensor panel, the cooking zone
will operate at maximum power for a certain period
of time and will then automatically switch back to the
follow-on heat setting that has been set.
The length of time that the automatic warm up func-
tion operates depends on the follow-on heat setting
selected.
1. Touch the heat setting selector sensor panel
set the desired heat setting from ¿ to Æ. The heat
setting that has been set will then be displayed. Af-
ter a period of 5 seconds, the a (=automatic warm
up function) will appear in the display in place of
the heat setting. After the warm up period has fin-
ished, the heat setting will once more be displayed.
3
If you should choose a higher heat setting
while the automatic function is in operation,
e.g. from Á to Ã, the period of time that the
warm up function is in operation will be adjust-
ed accordingly. If you select a lower setting,
the warm up period will end immediately.
You can cook using the automatic warm up
function only if the cooking zone is cold or
moderately warm. If a cooking zone is already
hot when you switch it on (h indicator), the
automatic warm up function cannot be used.
Cooking without the auto-
matic warm up function
If you wish to use the cooking zones without the au-
tomatic warm up function, select the desired heat
setting using the heat setting selector sensor panel
.
1. Touch the heat setting selector sensor panel
order to set the desired heat setting from Ç to ¿.
3
You can change the setting at any time using
the heat setting selector sensor panels
.
12
to
in
and