Zanussi ZKT 863 LX Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 12
Hob Zanussi ZKT 863 LX için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Zanussi ZKT 863 LX 32 sayfaları. Ceramic hob
Ayrıca Zanussi ZKT 863 LX için: Kurulum ve Kullanım Talimatları Kılavuzu (36 sayfalar)
Sayfayı Yazdır
Cooking using the auto-
matic warm up function
All of the cooking surface's four cooking zones can
be adjusted to any of nine settings, and are
equipped with an automatic warm up function:
– ¿, lowest heat setting
– Ç, highest heat setting
– a, automatic warm up function.
When you select the desired heat setting using the
heat setting selector sensor panel, the cooking zone
will operate at maximum power for a certain period
of time and will then automatically switch back to the
follow-on heat setting that has been set.
The length of time that the automatic warm up func-
tion operates depends on the follow-on heat setting
selected.
1. Touch the heat setting selector sensor panel
set the desired heat setting from ¿ to Æ. The heat
setting that has been set will then be displayed. Af-
ter a period of 5 seconds, the a (=automatic warm
up function) will appear in the display in place of
the heat setting. After the warm up period has fin-
ished, the heat setting will once more be displayed.
3
If you should choose a higher heat setting
while the automatic function is in operation,
e.g. from Á to Ã, the period of time that the
warm up function is in operation will be adjust-
ed accordingly. If you select a lower setting,
the warm up period will end immediately.
You can cook using the automatic warm up
function only if the cooking zone is cold or
moderately warm. If a cooking zone is already
hot when you switch it on (h indicator), the
automatic warm up function cannot be used.
Cooking without the auto-
matic warm up function
If you wish to use the cooking zones without the au-
tomatic warm up function, select the desired heat
setting using the heat setting selector sensor panel
.
1. Touch the heat setting selector sensor panel
order to set the desired heat setting from Ç to ¿.
3
You can change the setting at any time using
the heat setting selector sensor panels
.
12
to
in
and