Alecto DBX-82 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Babyphone Alecto DBX-82 herunter. Alecto DBX-82 17 Seiten.

After you have purchased loose baby units (DBX-83) you can set up multiple

babies 'monitoring'. Ensure that the baby units and the parent unit are connected

on the same channel and sub-channel. In case this does not work, you can also

choose an alternate monitoring, see below:

ALTERNATE MONITORING OF 2 BABY UNITS:

Baby units:

1. Set the two baby units on different channels (the sub-channel setting may be

selected too)

Parent unit:

1. First set the parent unit to the same channel and sub-channel as the 1st baby

unit, press the

2. Now push 7x on the

select the channel of the 2nd baby unit (select [OFF] to disable this feature).

3. Push 1x on the

sub-channel of the 2nd baby unit.

4. Push the

PTT

unit 1 and baby unit 2.

ALTERNATE MONITORING OF MORE THAN 2 BABY UNITS:

Baby units:

1. Set the baby units to different channels (set the sub-channel settings to 00)

Parent unit:

1. Push the

unit to consecutively listen to all the channels.

2. When the parent unit picks up sound from one of the channels it will stop

scanning and transmit only the signal from that camera. The parent unit will

continue scanning a few seconds after the sound has stopped.

- Push the

is received on the signal.

- Push the

PTT

MULTIPLE BABY UNITS

button to confirm the setting.

PTT

button and by using the

button and using the

button, the parent unit will now alternately listen between baby

button and

button simultaneously, this enables the parent

button to continue scanning if only noise or an unwanted channel

button to end the scanning function.

button or the

button select the

button