Alecto DBX-82 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Babyphone Alecto DBX-82 herunter. Alecto DBX-82 17 Seiten.

Seite drucken

SOUND ALERT:

You can set the baby unit to send an alert tone first before a transmission is sent.

The alert signal will be different from any other signals you receive.

Only baby unit:

1. Push on the

2. Push on the

button to turn the function [OFF] on the display.

3. Push the

Note: These sounds are NOT added to the beeps sent for the purpose of con-

nection control.

KEYPAD LOCK:

To avoid accidentally changing the channel on the parent unit or turning the

volume too low, you can lock the keypad in the following way:

Only parent unit:

1. Push on the () button until the icon

2. To unlock it, push the () button again until the icon disappears from the display.

The buttons

display.

STOPWATCH:

The parent unit is equipped with a stopwatch function,

1. Push on the

- Push the

2. Push the

During this mode, the baby monitor function on the parent unit will still be active.

KEYPAD TONE:

When you push a button on the parent unit a beep tone will sound. You can

switch the beep tones on or off using the following steps:

1. Push the

2. Push the

button to switch the beep tone function [ON] in the display, or push

the

button to deactivate the function [OFF] in the display.

3. Push the

PTT

button 5x; the word [CA] will then light up.

button to turn the function [ON] in the display or push the

button to set the selected function.

and

will be blocked when the

button for 3 seconds to turn on the stopwatch

button to start the stopwatch

button for the laps time (the time will continue to run)

button to continue

button to set the stopwatch at 00:00

button for 3 seconds to turn off the stopwatch

button 6x; [ONto] or [OFFto] will then flash on the display.

button to set the selected function.

lights up in the display.

icon lights up on the