Clarke PPH10ND Betriebs- und Wartungsanleitung - Seite 10
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Luftkompressor Clarke PPH10ND herunter. Clarke PPH10ND 17 Seiten. Air compressor
Auch für Clarke PPH10ND: Betriebs- und Wartungshandbuch (10 seiten), Betriebs- und Wartungsanleitung (20 seiten)
Seite drucken
MAINTENANCE
DAILY
a. Drain Air Receiver of any condensate
b. Check engine oil level and top up where necessary. Ensure the dipstick
breather hole is not blocked.
c.
Check pump oil level
WEEKLY
a. Clean Pump Air Filter
1. PP10ND
Unscrew pump air filter from inlet manifold. Remove cover and check air
filter. Wash in warm soapy water if necessary, rinse thoroughly and replace
when completely dry. If it is damaged in any way, replace. Clean the
plastic housing thoroughly before reassembly.
2. PP15ND
Turn Pump Air Filter cover and pull away to reveal paper element. If badly
contaminated, replace. Remove any loose contaminants if any then
replace.
b. Clean the engine cooling fins.
6 MONTHLY
Renew pump lubricating oil.
Drain pump by removing the drain
screw (Arrowed in Fig.3).
Replace screw and top up until oil is
level with the mark on the dipstick,
using SAE40 oil available from your
Clarke dealer as follows:
Compressor oil - 1 litre: Part No. 3050810
Compressor oil - 5 litre: Part No. 3050802
In addition to the above, check the engine manual for service
schedule.
Repairs should only be carried out by a qualified engineer. If problems
occur, contact your Clarke dealer.
Fig.3
- 10 -