Clarke PPH10ND Instruções de funcionamento e manutenção - Página 10

Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Compressor de ar Clarke PPH10ND. Clarke PPH10ND 17 páginas. Air compressor
Também para Clarke PPH10ND: Manual de operação e manutenção (10 páginas), Instruções de funcionamento e manutenção (20 páginas)

MAINTENANCE

DAILY

a. Drain Air Receiver of any condensate

b. Check engine oil level and top up where necessary. Ensure the dipstick

breather hole is not blocked.

Check pump oil level

WEEKLY

a. Clean Pump Air Filter

1. PP10ND

Unscrew pump air filter from inlet manifold. Remove cover and check air

filter. Wash in warm soapy water if necessary, rinse thoroughly and replace

when completely dry. If it is damaged in any way, replace. Clean the

plastic housing thoroughly before reassembly.

2. PP15ND

Turn Pump Air Filter cover and pull away to reveal paper element. If badly

contaminated, replace. Remove any loose contaminants if any then

replace.

b. Clean the engine cooling fins.

6 MONTHLY

Renew pump lubricating oil.

Drain pump by removing the drain

screw (Arrowed in Fig.3).

Replace screw and top up until oil is

level with the mark on the dipstick,

using SAE40 oil available from your

Clarke dealer as follows:

Compressor oil - 1 litre: Part No. 3050810

Compressor oil - 5 litre: Part No. 3050802

In addition to the above, check the engine manual for service

schedule.

Repairs should only be carried out by a qualified engineer. If problems

occur, contact your Clarke dealer.

Fig.3

- 10 -