Blackberry Radar H2 Installationshandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Installationshandbuch für Radar Blackberry Radar H2 herunter. Blackberry Radar H2 30 Seiten. Dry van, insulated trailers roll-up doors
Auch für Blackberry Radar H2: Installationshandbuch (33 seiten), Installationshandbuch (26 seiten), Installationshandbuch (25 seiten), Installationshandbuch (32 seiten), Installationshandbuch (33 seiten), Installationshandbuch (34 seiten), Installationshandbuch (35 seiten), Gebrauchsanweisung (33 seiten), Installationshandbuch (32 seiten), Installationshandbuch (26 seiten), Installationshandbuch (25 seiten), Installationshandbuch (28 seiten)

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 21

It is recommended that you install the module as level as possible on the asset. To

help ensure the device is level, you may try one of the following techniques.

Technique 1: Position the T-Square along the edge of the door. Using the T-square

as a guide, draw a horizontal line approximately 5" (13 cm) in length, in the area you

plan to install the device, with your pencil or marker. Align the bottom edge of the

template to the line.

Tip: To avoid leaving a permanent mark on your trailer or container after the device

installation is complete, we recommend using a pencil or non-permanent marker to

create the guideline.

Technique 2: Visually, place the template in the desired installation location. Using

either a T-square or level. Check that the template is level.