Blackberry Radar H2 Installationshandbuch - Seite 30

Blättern Sie online oder laden Sie pdf Installationshandbuch für Radar Blackberry Radar H2 herunter. Blackberry Radar H2 30 Seiten. Dry van, insulated trailers roll-up doors
Auch für Blackberry Radar H2: Installationshandbuch (33 seiten), Installationshandbuch (26 seiten), Installationshandbuch (25 seiten), Installationshandbuch (32 seiten), Installationshandbuch (33 seiten), Installationshandbuch (34 seiten), Installationshandbuch (35 seiten), Gebrauchsanweisung (33 seiten), Installationshandbuch (32 seiten), Installationshandbuch (26 seiten), Installationshandbuch (25 seiten), Installationshandbuch (28 seiten)

Seite drucken
Blackberry Radar H2 Installationshandbuch
30
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE
2. Mark the height where the device will be installed on the door of the trailer/container.
The bottom of the device should be over 80" (203cm)* above the interior floor.
•
The unit should be level.
•
The unit should be installed as close to the center of the trailer/container as
•
possible. When installing on trailers or containers with door bars, ensure there is
approximately 1-2" (2.5-5cm) of clearance space between the left side of the unit
and the edge of the door bar.
3. Remove the adhesive from the rear of the template and place the template in the
desired installation location. The adhesive at the back of the template ensures that it
stays on the door surface for accurate drilling of your holes.