Blackberry Radar H2 Installatiehandleiding - Pagina 30

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry Radar H2. Blackberry Radar H2 30 pagina's. Dry van, insulated trailers roll-up doors
Ook voor Blackberry Radar H2: Installatiehandleiding (33 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Gebruiksaanwijzing (33 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (28 pagina's)

Blackberry Radar H2 Installatiehandleiding
30
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE
2. Mark the height where the device will be installed on the door of the trailer/container.
The bottom of the device should be over 80" (203cm)* above the interior floor.
The unit should be level.
The unit should be installed as close to the center of the trailer/container as
possible. When installing on trailers or containers with door bars, ensure there is
approximately 1-2" (2.5-5cm) of clearance space between the left side of the unit
and the edge of the door bar.
3. Remove the adhesive from the rear of the template and place the template in the
desired installation location. The adhesive at the back of the template ensures that it
stays on the door surface for accurate drilling of your holes.