Clarke CAT24B Handbuch für Betrieb und Wartung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Sander Clarke CAT24B herunter. Clarke CAT24B 16 Seiten. Hd dual-action sander
Seite drucken
c)
The tool will be left unattended.
d)
Moving to another work area.
• Never use the tool if it is defective or operating abnormally.
• The tool should be serviced as required by your CLARKE dealer.
• Avoid damaging the tool for example by applying excessive force.
• ALWAYS maintain the tool with care. Keep it clean for best and safest
performance.
• ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the tool.
• ALWAYS ensure the tool has stopped before putting it down after use.
• ALWAYS ensure that any attachments are correctly fastened before
connecting the tool to the power supply.
• Quick change air-line couplings should not be located at the tool. They
add weight and could fail due to vibration.
• DO NOT force or misuse the tool. It will do a better and safer job operating
at the rate for which it was designed.
• Do not remove any labels. Damaged labels should be replaced.
• This tool vibrates during use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and
seek medical advice before resuming use.
TRANSPORTATION
• Never carry the tool by the air supply hose.
• Never carry the tool with your finger on the trigger.
STORAGE
• When not in use the tool must be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
• Avoid storage in environments where the temperature is below 0
Parts & Service: 020 8988 7400/E-mail: [email protected] or [email protected]
5
o
C.