Clarke CAT24B Instrukcja obsługi i konserwacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke CAT24B. Clarke CAT24B 16 stron. Hd dual-action sander

The tool will be left unattended.

Moving to another work area.

• Never use the tool if it is defective or operating abnormally.

• The tool should be serviced as required by your CLARKE dealer.

• Avoid damaging the tool for example by applying excessive force.

• ALWAYS maintain the tool with care. Keep it clean for best and safest

performance.

• ALWAYS ensure the workpiece is firmly secured leaving both hands free to

control the tool.

• ALWAYS ensure the tool has stopped before putting it down after use.

• ALWAYS ensure that any attachments are correctly fastened before

connecting the tool to the power supply.

• Quick change air-line couplings should not be located at the tool. They

add weight and could fail due to vibration.

• DO NOT force or misuse the tool. It will do a better and safer job operating

at the rate for which it was designed.

• Do not remove any labels. Damaged labels should be replaced.

• This tool vibrates during use. Vibration may be harmful to your hands or

arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and

seek medical advice before resuming use.

TRANSPORTATION

• Never carry the tool by the air supply hose.

• Never carry the tool with your finger on the trigger.

STORAGE

• When not in use the tool must be disconnected from the air supply and

stored in a dry place out of the reach of children (preferably in a locked

cabinet).

• Avoid storage in environments where the temperature is below 0

Parts & Service: 020 8988 7400/E-mail: [email protected] or [email protected]