Clarke HSEC650 Betriebs- und Wartungsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Water Pump Clarke HSEC650 herunter. Clarke HSEC650 20 Seiten. Submersible pumps
Seite drucken
OVERVIEW
MAINS CABLE
FLOAT
SWITCH
The CLARKE HSE range of submersible pumps are of rugged and durable
construction, designed for long lasting continuous operation. They are
suitable for discharging pools, ponds, fountains, pits and any waste water
drainage. They can handle foul water containing sewage or other
suspended material including sand up to a maximum of 3kg/m
amount stated in the specifications for each model. They may be used for
pumping water, (including seawater) or water containing small solids in
suspension with particle sizes of up to 6-10mm in diameter, dependant upon
the size of pump. The pumps are not suitable for handling inflammable,
corrosive, explosive or dangerous liquids.
The range includes models 130, 200, 300/301, 360/361 and 650/651 as
itemised in the Technical Specification on page 16.
The HSEC650 & HSEC651A are fitted with a tungsten carbide cutter, and is
specially suited for heavily polluted water and waste solids, such as sewage,
light slurry, factory waste etc. The HSE200 is fitted with a strainer to prevent the
ingress of foreign matter.
Float switches are fitted to those models bearing an 'A' suffix, meaning the
pump will stop and restart automatically as the surrounding water level
changes. This makes them suitable for permanent or semi-permanent
installations, eg. installations where it is necessary to maintain a water at a
particular level without an operator in attendance.
LIFTING HANDLE
7
DISCHARGE
OUTLET
STRAINER
PROTECTED
INLET
3
to an