Clarke IVP14A Handbuch für Betrieb und Wartung - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump Clarke IVP14A herunter. Clarke IVP14A 13 Seiten. Submersible water pump
Seite drucken
USING THE PUMP
CAUTION: CHECK THE PUMP FOR DAMAGE BEFORE USE, DO NOT USE
THE PUMP IF IT IS DAMAGED IN ANY WAY.
1 Connect the mains plug to a high sensitivity residual current device (RCD)
which has a tripping current of less then 30mA.
2 Switch the mains power supply on.
• The pump incorporates a float
switch, which automatically
switches the pump ON when
the water is above a
predetermined level.
3 The pump will begin to drain
water.
• As the water level falls, so will
the float switch, until it stops the
pump.
4 When the pumping is finished, disconnect the pump from the mains power
supply.
• The pump is fitted with a thermal cut out to protect the motor from
overheating. If the thermal cut out activates, the motor will stop and
automatically switch back on when it has cooled down sufficiently.
8