Clarke IVP14A Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Pompa Air Clarke IVP14A. Clarke IVP14A 13 halaman. Submersible water pump
Halaman Cetak
USING THE PUMP
CAUTION: CHECK THE PUMP FOR DAMAGE BEFORE USE, DO NOT USE
THE PUMP IF IT IS DAMAGED IN ANY WAY.
1 Connect the mains plug to a high sensitivity residual current device (RCD)
which has a tripping current of less then 30mA.
2 Switch the mains power supply on.
• The pump incorporates a float
switch, which automatically
switches the pump ON when
the water is above a
predetermined level.
3 The pump will begin to drain
water.
• As the water level falls, so will
the float switch, until it stops the
pump.
4 When the pumping is finished, disconnect the pump from the mains power
supply.
• The pump is fitted with a thermal cut out to protect the motor from
overheating. If the thermal cut out activates, the motor will stop and
automatically switch back on when it has cooled down sufficiently.
8